The Lab
11/21/2026
William Christman
Range Day | 5.56x45mm NATO
Every Saturday we take one round apart. This week it's the 5.56x45mm NATO, the M16 and M4 round.
It was built from the .223 Remington for ArmaLite engineer Eugene Stoner's AR-15. The US adopted it with the M16 in 1964, and NATO standardized it in 1980.
Twins, not clones: a .223 and a 5.56 look identical, but the 5.56 runs at higher pressure. Military primers use hard cups to prevent accidental slam fires.
Stick vs. ball: smokeless powder starts with nitrocellulose. Stick powder is pressed like spaghetti and cut into tiny cylinders. Ball powder is beaded into tiny spheres in water and pours like sand. The 1964 switch to ball powder helped jam M16s in Vietnam.
One base or two: single-base powder has one energetic ingredient. Double-base adds nitroglycerin for more energy per grain. Most military 5.56 loads use double-base ball powder.
A history lesson: Paul Vieille invented single-base powder in 1884. Alfred Nobel invented double-base in 1887 and shared it with the British, where Abel and Dewar tweaked it into Cordite. Nobel sued over the patent and lost all the way to the House of Lords in 1895.
.224 inches: loads run from the 55-grain M193 to the 62-grain M855 "green tip" with a steel penetrator, and now the lead-free M855A1, at over 3,000 feet per second.
Twice the ammo: a 5.56 round weighs about half as much as a 7.62 NATO round, so a soldier can carry roughly twice as many for the same load.
Hitting the range this weekend? Shoot straight, and follow Supply Energetics for a new round every Saturday.

The Lab
How an Army chemist's idea for a cube-shaped explosive took 15 years to build, beat HMX on paper, and still never left the lab.
11/15/2026

The Lab
We take apart the 9mm Luger, from Georg Luger's 1902 design to the case, primer, powder and bullet inside every round.
11/14/2026

News
Session proposals and abstracts are now open for the International Nitrocellulose & Heat Flow Calorimetry Symposium, September 21-23, 2027 in Washington, DC, with submissions due January 29, 2027.
11/13/2026
Copyright © 2026 Supply Energetics All Rights Reserved.